ESPRIT Wire EDM Machine Tool Partners

PARTNERS Machine Tools - Wire EDM

ESPRIT’s machine-specific EDM KnowledgeBase™ provides you with a full range of cutting features, automation, and factory-certified post processors to maximize performance. Readily access each EDM manufacturer’s unique cutting technology and methodologies through machine-specific technology pages.

ESPRIT has all your needs covered no matter what Agie Charmilles machine you use and ESPRIT's KnowledgeBase™ supports every make and model of Agie Charmilles EDM machines.

ESPRIT has a solution for the newer AC 20P/30P series, AC 200/300/400 series and AC 1000/2000/3000 series while also supporting all older model EDM Machines. ESPRIT's full exploitation of Agie's unique machine capabilities, including dual tapering, upper and lower tapers, and sophisticated advanced conics. For the AgieVision, ESPRIT accepts the Ra, Tkm, and Te technology settings to create the script file format (SBR, SBL and ISO). And ESPRIT provides all the confidence you will need in for accurate programming of the timeless AGIE 123 series EDM machines. Additionally, with ESPRIT users have full use of the advanced and unique functionality built into Charmilles machine tools and their Millennium, Charmilles and Fanuc controls. ESPRIT offers support for Charmilles CT-Expert, database for cutting technology, and other unique capabilities in advanced tapering and material-handling functions such as slug evacuation.

GF AgieCharmilles
Losone, Switzerland


For Fanuc EDM machines, ESPRIT provides the flexibility to control the cutting conditions with a set of user definable technology parameters such as S power and F feedrate for each cut. Selecting one of the cutting strategies will then create a complete machining process including all the rough cuts, skim cuts, and wire thread/cut instructions.

Fanuc LTD
Yamanashi, Japan


Specific to Makino, ESPRIT’s machining database provides factory cutting data in inch or metric format, an option that includes the latest machines. Users also have the flexibility to modify existing databases, build their own cutting databases, and even output offset using "direct decimal" or "indirect register" options.

Makino, Inc
Tokyo, Japan


ESPRIT includes a technology database populated with Mitsubishi-specific factory recommendations for the E-pack power setting, feedrates, and offsets for a wide variety of cutting situations. Enter the machine model, workpiece material and thickness, and desired surface finish, and ESPRIT will automatically give you the factory-recommended technology and number of skim cuts required.

Mitsubishi Corporation


Get the most out of your Ona machine with ESPRIT's built-in KBM technology. It provides individual control over the 10 generator parameters including off-time, voltage, and servo to increase machining efficiency for unique individual situations. You can also divide the cutting process into 3 zones - land, taper, and glue tab, and for each zone choose to apply up to 6 cuts (one rough cut with up to 5 skim cuts). The result is a simple mechanism to maximize work piece quality and minimize machining time.

ONA Electroerosion, S.A.
Durango, Spain


With ESPRIT, Sodick programmers get a flexible cutting system with up to 10 definable cuts in any combination of forward and reverse cutting strategies. A full suite of conditions and cutting technologies may be specified for each cut, land and relief, rough and skim, including control over the machine’s advanced features, powered Z-axis, tank control, and wire control.

Sodick Co., Ltd.
Yokohama, Japan

We use cookies to offer you a better browsing experience, analyze site traffic, and personalize content. Read about how we use cookies and how you can control them by clicking here.
If you continue to use this site, you consent to our use of cookies.